Pinball Medic Amusements
New Replacement Pinball Circuit Boards

NEW REPLACEMENT PINBALL BOARDS FOR WILLIAMS TYPE PINBALL GAMESNEW REPLACEMENT CIRCUIT BOARDS FOR BALLY TYPE PINBALL GAMESNEW REPLACEMENT BOARD SETS FOR DATA EAST PINBALL TYPE GAMESNEW BOARD SETS FOR GOTTLIEB TYPE PINBALL GAMESEarly Stern replacement pinball boards
Williams, Bally, Gottlieb and Data East, Early Stern
Solid State Pinball Power Supply, Solenoid Driver and
Bally and Stern MPU boards, OC Flipper Button Circuit Board

Pinball Medic has to "bulk" order the majority of boards on this page from our suppliers. Our full repair/restoration shop and lack of labor/monetary resources for parts inventory restocking, we will not be able to supply most of the boards listed on this page. This should be a temporary situation as we try to find more sources and more types of new pinball replacement board sets to offer to the coin-op community.

We have now found an additional board supplier. Pinball Medic has added new versions of classic to modern pinball circuit boards to this page.

We now have in stock replacements for the following classic pinball boards:    Now In Stock!
Williams WPC MPU board (new version of the replacement board we already offer. It is much closer to the original pinball board for easier troubleshooting and repair.  It uses new electronics and replaceable/repairable circuitry.)

Bally AS-2518-35 or AS-2518-17, AS-2518-133, AS-2962-7 MPU board and Stern MPU100 or MPU200 replacement MPU     Now In Stock
!
This replacement MPU board is much closer to the original pinball MPU board for easier troubleshooting and repair.

These additional new MPU boards are of great quality and are priced low enough to possibly make board repair extinct.
Stay tuned to this page for updated info on our new board inventories and additional information about the new circuit boards Pinball Medic will be adding shortly to this page.

We will have a daughter card soon for Bally -17 and -35 MPU, Stern MPU-100 & MPU-200 boards that will allow switch selectable game titles, the elimination of all game roms, memory and battery backed-up memory (5101 chips)  on old/new MPU boards (imagine, no more need to replace bad chip sockets or ROM chips to install this new board inside of any old style Bally or Stern pinball game).
All boards on this page have the following characteristics:
• All boards are newly redesigned reproductions of the original Pinball Printed Circuit Board Sets and are not manufactured by the game's OEM.
• They are direct 'drop-in' replacements and do not require game, board mounting or wiring harness modifications.
• Most boards feature a new design using all modern components to eliminate the old original board 'engineering' flaws and connector corrosion without sacrificing compatibility with the original board sets. The exception is the Bally/Stern MPU board. This new board is very close to the original designed system board.
• All new power supply boards include modern low drop out (LDO) regulator technology for superior voltage regulation and heat reduction.
• WPC & WPC-S Solenoid Driver and Power Supply board features in-rush current limiting, soft start power supplies and high current capacity MOSFET solenoid coil driver transistors.
Pinball Medic Amusements is not responsible for shipping an incorrect system board if the wrong board was ordered.
We will try to double check to see if the correct board was ordered based on game title.

• Unless noted otherwise:  Shipping will be $12 (using USPS bulk Priority three day ground service)  for one large (Williams solenoid driver board, Bally/Stern MPU) or two or more small sized boards (WPC MPU, power supply, OC board) shipped to the same address in the U.S.A.

Williams, Bally, Gottlieb and Data East Pinball System Board Index

Williams Pinball System 3,4,6 and 7 - 9  Power Supply BOARDS
System 3-6=WPS36          System 7-9=WPS79
Both boards priced at $65
temporarily out of stock
Systems 3-6 have different pin outs to the 7-9 power supply board and are not compatible with each other. They are completely compatible with the original power supply board. All boards on this page do not require any wiring harness changes and are drop in compatible with the original boards they replace.

Williams WPC-89 & WPC-S (Security PIC)
Power Supply and Solenoid Driver Board
Price $225   WPC89SPS     temporarily out of stock

(Shipping - $9 per board shipped to the same address)
Williams WPC89 MPU board (cloned board version)
Price $190    Part number WPC89MPU_C        Now in Stock!!!
This is a reversed engineered "clone" board that operates and looks exactly like the original              Shipped with programmed game ROM.
Original battery holder and square ASIC chip are compatible with this board but not included.

Ship us your old MPU board and we will install your old ASIC chip into this new replacement Pinball MPU board.

WPC-89 MPU Order Form

This board is drop in compatable with the following PINBALLS:

Addams Family, Addams Family Gold, Black Rose,
Creature From the Black Lagoon, Demolition Man, Dr. Dude, Dr. Who, Dracula, Fish Tales, Funhouse, Getaway, Gilligan's Island, Harley Davidson, Hurricane, Indiana Jones, Judge Dredd, Machine Bride of Pinbot, The Party Zone, Popeye, Star Trek The Next Generation, Terminator 2, The Machine, Bride of Pinbot, Twilight Zone, White Water
Williams system 11 and Data East Power Supply BOARD
(Alphanumeric Display Pinball Games Only)
Williams part numbers D-8345-???    ???=Game Number
Original Data East part number 520-5000-00
Price $65   WDEPS11-A     temporarily out of stock

Bally / Williams Type 2 Flipper Button O. C. BOARD
Price $10   WB2FBB   temporarily out of stock
(Shipping - dependent on number of WB2FFBB boards ordered)
Board shipping weight is less then a 1/2 pound.

Pinball Medic NEW Replacement pinball circuit boards located in Austin, Texas
Data East Pinball Power Supply BOARD
Replaces Data East board part numbers 520-5047-00 and 520-5047-01, and 520-5047-02
(Pinball Games with 128x32 or 128x16 Dot Matrix Displays (DMD display games only))
Price $65   DEDMDPS   temporarily out of stock

Gottlieb System 80
Power Supply BOARD
Gottlieb part number: B-19694
Price $65  GOTTPS80   temporarily out of stock

Gottlieb System 1
Power Supply BOARD
Price $65  GOTTPS1   temporarily out of stock
News:
We have a possible source for a switch-mode system 1 power supply that offers grounding screw terminals and can source more current then the Gottps1 board. More info should be posted shortly.
The following replacement MPU board replaces these board types:
Bally AS-2518-35 or AS-2518-17, AS-2518-133, AS-2962-7
Stern MPU100 or MPU200
Price $190        Part number BS35MPU           Now in Stock!!!
This is a reversed engineered "clone" board that operates and looks exactly like the original.             Shipped with programmed game ROM.

This board comes with the rechargeable battery connected. We can replace the battery with a 'will not leak' memory capacitor. Additional costs will occur with this battery circuit modification.

Bally - 35/Stern 100/200 MPU order Form
This new MPU board works in the following pinballs without modification:

B.M.X., Embryon, Granny & Gators, Night Rider, Space Invaders (pinball), Baby Pacman, Evel Knievel, Harlem Globetrotters, Nitro Groundshaker, Speakeasy, Black Jack, Fathom, Hot Doggin, Paragon, Spectrum, Black Pyramid, Fireball Classic, Kings of Steel, Playboy, Spy Hunter (pinball), Centaur, Fireball 2, Kiss, Power Play, Star Trek, Cybernaut, Flash Gordon, Lost World, Rapid Fire, Strikes & Spares, Dolly Parton, Freedom, Mata Hari, Rolling Stones, Supersonic, Eight Ball, Frontier, Medusa, Silverball Mania, Vector, 8 Ball Deluxe, Future Spa, Mr. & Mrs. Pacman, $6 Million Man, Viking, Elektra, Goldball, Mystic, Skateball, X's & O's, Xenon

The following EARLY STERN GAMES (1977-1980) run on the Bally DASH 35: (Later STERN MPU-200 games will also run with some board modifications; contact us for more info.)
Dracula, Majic, Stars, Genesis, Shuffle, Memory Lane, Stingray, Hot Hand, Nugent, Trident, 'Lectronomo', 'Pinball', Wildfyre
New Pinball Replacement Circuit Board Order FORM

Williams system 3,4,6 & 7-9 Power Supply boards
New Replacement Williams system 3,4,6 power supply board
Williams pinball system 3,4 & 6
power supply board
Williams pinball system 7 & 9 power supply board
Williams pinball system 7 & 9
power supply board
Willams system 3,4,6 power supply board inside a pinball game
Williams pinball system 6
power supply installed

Note: A Williams system 7/9 type power supply board can not replace a system 3,4 or 6 pinball power supply board.
The two boards have the same basic power supply components, but have different connector wiring.
We are not responsible for shipping an incorrect system board if the wrong board was ordered.
We will try to double check to see if the correct board was ordered based on game title.
Williams System Generation Williams Pinball Game Titles Board Part Number Discounted Price
Each Board
System 3,4,6
Algar, Alien Poker, Blackout, Contact, Disco Fever, Firepower, Flash, Gorgar, Hot Tip, Lucky Seven, Phoenix, Scorpion, Stellar Wars, Time Warp, Tri-Zone, World Cup WPS36 $65
System 7 & 9
Barracora, Black Knight, Comet, Cosmic Gunfight, Defender, Firepower 2, Hyperball, Joust, Jungle Lord, Laser Cue, Pharaoh, Solar Fire, Sorcerer, Space Shuttle, Star Light,
Time Fantasy, Varkon, Warlock
WPS79 $65

Go Back to Pinball Board Index

Williams System 11 and Data East power supply board
New replacement Williams system 11 and Data East Pinball power supply board
Used on Williams and Data East Pinball Games with Alphanumeric Only
Williams part numbers D-8345-??? (where ??? is the game number)
Data East part number 520-5000-00
Board Part Number
WDEPS11-A    $65 Each Board
Williams System 11 games Data East DMD games
Alley Cats, Banzai Run, Big Guns, Cyclone, F-14 Tomcat, Fire!, Grand Lizard, High Speed, Millionaire, Pinbot, Road Kings, Space Station, Swords of Fury
ABC Monday Night Football, Back to the Future, Laser War, Phantom of the Opera, Playboy 35th Anniversary, Robocop, Secret Service, The Simpsons, Time Machine, Torpedo Alley

Go Back to Pinball Board Index
New Gottlieb System 80 Power Supply board
Gottlieb part number B-19694


Gottlieb type new replacement system 80 power supply board
Board Part Number GOTTPS80     Price $65
Note: Gottlieb System 80 power supplies all have design defects and will over heat and stop working or provide too much voltage to the sensitive electronics over time. Replacing the original power supply is mandatory to keep these game functioning.

Gottlieb System 80 Pinball Games
Alien Star, Amazon Hunt, Black Hole, Caveman, Circus, Counterforce, Devil's Dare, El Dorado, Force II, The Games, Going Nuts, Haunted House,
Ice Fever, Jacks to Open, James Bond, Krull, Mars God of War, Panthera, Pink Panther, Punk, Q*bert's Quest, Rack Em Up, Ready Aim Fire, Rocky,
Royal Flush Dix, Spiderman, Spirit, Star Race, Striker, Super Orbit, Timeline, Touchdown, Volcano


Go Back to Pinball Board Index


New Replacement Gottlieb system 1 power supply board

Gottlieb system 1 pinball power supply board
Pinball Medic's Board Part Number GOTTPS1    Price $65
Note: Gottlieb System 1 Power Supplies all have design defects and will over heat and stop working or provide too much voltage to the sensitive electronics over time. Replacing the original power supply is mandatory to keep these game functioning.

Gottlieb system 1 pinball games
Asteroid Annie, Buck Rodgers, Charlie's Angels, Cleopatra, Close Encounters, Count Down, Dragon, Genie, Hulk, Joker Poker, Pinball Pool,
Roller Disco, Sinbad, Solar Ride, Torch, Totem


Go Back to Pinball Board Index



Data East Power Supply Board
Our part number DEDMDPS  Price $65
DataEast DMD power supply board
Data East Power Supply board for
Dot Matrix Display Pinball Machines
Replaces Data East part numbers
520-5047-00 and 520-5047-01, and 520-5047-02
Test points have been added for all voltages generated on this board

The wired connector (four pin connector) at the top right corner of the original
power supply board (original part number 520-5047-02) has been replaced by an on-board
connector (center far right hand side) on this new replacement power supply board.

No game wiring harness modifications are required to use this new board inside a pinball game.

Data East DMD Pinball Games
Batman, Checkpoint, Guns N' Roses, Hook, Jurassic Park, Last Action Hero, Lethal Weapon 3, Rocky & Bullwinkle, Star Trek, 25th Anniversary,
Star Wars, Tales from the Crypt, Teenage Mutant Ninja Turtles, Tommy, WWF Royal Rumble


Go Back to Pinball Board Index

Williams System WPC(89) & WPC-S Power Supply and Solenoid Driver board
New Replacement Williams WPC WPC-S Power Supply and Solenoid Driver Board

Replaces: Williams Pinball Board Numbers:
A-12697-1, A-12697-2, A-12697-3 & A-12697-4
Pinball Medic's Part Number  WPC89SPS
Price $225


Features:
Test points have been added for all voltages generated on this board
WPC & WPC-S Solenoid Driver and Power Supply board features in-rush current limiting, soft
start power supplies and high current capacity MOSFET solenoid coil driver transistors.

Note: The old original board is a major cause of game resets due to connector, voltage regulator obsolesce and capacitor age.
Shipping will be $9 up to two boards shipped to the same address. Shipping on more then two boards will depend on the number of boards ordered

Williams system WPC & WPC-S Pinball Games
Addams Family, Addams Family Gold, Black Rose, Corvette, Creature Black Lagoon, Demolition Man, Dirty, Harry, Dr. Who, Dracula, Fish Tales,
Flintstones, Funhouse, Gilligan's Island, Harley Davidson, Hurricane, ,Indiana Jones, Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd,
No Fear, Party Zone, Popeye, RoadShow, Star Trek Next Generation, Terminator 2, The Getaway, The Machine Bride Of Pinbot (BOP), The Shadow,
Theater of Magic, Twilight Zone, WhiteWater, Who Dunnit, World Cup Soccer '94


Go Back to Pinball Board Index
Board Part Number
WB2FBB Board Price $12

OC Flipper Botton pinball board
Bally & Williams (WPC) - Type 2 Flipper Button board
Type 2 boards are NOT interchangeable with the Type 1 boards.


Late Model Pinballs with Type 2 Flipper Button Circuit Boards
Attack from Mars, Cactus Canyon, Championship Pub, Circus Voltaire, Congo, Corvette, Demolition Man, Dirty Harry, Flintstones, Indiana Jones,
Indianapolis 500, Jackbot, Johnny Mnemonic, Judge Dredd, Junkyard, Medieval Madness, Monster Bash, NBA Fastbreak, No Fear, No Good Gofers,
Popeye, Roadshow, Safe Cracker, Scared Stiff, Shadow, Star Trek the Next Generation, Tales of the Arabian Nights, Theatre of Magic, Who Dunnit,
World Cup Soccer '94
Type 1 Flipper Button Circuit board pinball games (These pinballs are NOT compatible with the type 2 Flipper board)
Addams Family Gold (Note: Also, some regular Addams Family games.)
Creature From the Black Lagoon, Doctor Who, Dracula, Fish Tales, Twilight Zone, Whitewater


PLEASE USE OUR PINBALL REPLACEMENT BOARDS FORM TO ORDER ALL NEW BOARDS.
'Board Identification by Game' charts are available on the Pinball Board Identification page.
Also See: Pinball Game ROM Programming and Pinball Board Repair pages.
PINBALL MEDIC
SITE LINKS
Pinball Medic
Located in
Austin, Texas.
Buys, sells, repairs and
restores Coin-Op arcade
game equipment including
Pinball Games,
Video Arcades,
Electromechanical Gun Games.
New Pinball Replacement
Circuit Board Order FORM

Payment Methods:
Cash, Money Order,
Checks, Cashier's Check.
No Paypal or Credit
Cards accepted.


PRIVACY POLICY | TERMS OF USE | ABOUT US | CONTACT US | JOB OPPORTUNITIES
Pinball Machines For Sale Video Games For Sale Coin Operated Game Parts
Pinball Game Repair Video Game Repair Coin-Op Tech Tips (main page)
Arcade Game Tips (page 2)
Yellow Jacket Pinball Dolly Arcade Game Repair Game Electronic Parts
Pinball Game Restoration Video Game Restoration Playfield Rubber Ring Kits
Game ROM \ PROM Programming New Monitors & Repair Monitor Capacitor Kits
Pinball Machine Restoration Process Video Arcade Restoration Process New Replacement Pinball Boards
Pinball Board Repair Game Shipping CONTACT PINBALL MEDIC
Light Bulbs, Electronic Parts HOME SITE MAP
Copyright 2003-2008 pinballmedic.com
All Rights Reserved

Pinball Medic does not assume responsibility for any damages or losses, whether direct, indirect, incidental, special or consequential to any equipment or items damaged by any of the boards listed on this page.