PINBALL MEDIC AMUSEMENTS
Located in Austin, Texas
We provide a wide selection of Video Arcade Games and Pinball machines for sale and even make the machines to move them.
Whether your game uses relays, transistors or is all mechanical, contact the medic to fix your coin-op.
As long as the game is full sized and coin operated, we will get to work and make the game do the same.
COIN-OP GAME SALES - FULL SIZED VIDEO GAMES, COIN OPERATED ARCADE
PINBALL / VIDEO GAME REPAIR AND RESTORATION
Pinball Medic Amusements grew out of the best of hobbies, pinball and video game collecting. We offer the combination of over fifteen years of professional experience in game electronics troubleshooting and repair, pinball and video
game restoration. We do field service in the home and at your business location.
We also buy and sell coin-op equipment.
In-home house calls or commercial arcade site repair for your ailing game.
We're one of the only remaining repair shops left in the United States still repairing and refurbishing both electromechanical and electronic games including EM gun games, pinball, video and all mechanical coin-op.
Pinball Medic Amusements Repairs and Restores
the following Pinball game manufacturers
Bally, Data East, Gottlieb, Sega, Stern and Williams
Our Field Service Area is limited to a 35 mile radius of the Austin, Texas area unless special arrangements are made one week prior to the service call. Additional fees and mileage charges apply to non service area game repair. Game Restorations
and Monitor repair can not be performed on location, however, monitors can be removed from the game for repair as field service.
Code Blue Priority Emergency Game Repair Service.
$90 per hour for 'Code Blue' service. (one hour minimum)
The Code Blue labor rate is charged whether the repair is done in our shop or as a field service call.
Field Service Rates: Pinball Machines and Video Games
$70 per hour (one hour minimum) $17.50 per quarter hour after first hour.
$45 per hour for game Repair / Refurbishment / Restoration (In shop service only rate)
Fees & Travel Expenses:
Diagnostic Fee - $35 Charged if the game or monitor is not repairable.
Field Service Fee $75 This fee does not apply if the game is delivered to our repair shop in South Austin, Texas.
Game Transportation / Travel Fee - $100 Applies if the game is outside our normal service area.
We will not charge both a Field Service Fee and a Game Transportation Fee on the same service call.
Pinball Medic Amusements charges 50 cents per mile if we have to travel outside our normal service area (35 mile radius of central Austin).
Mileage is in addition to the Field Service or Game Transportation Fees. Mileage starts from our South Austin repair shop.
Coin-Op Video Arcade Monitor Replacement and Repair Labor Rates:
(In shop Monitor Repair Service only. Monitor must be removed as part of a Field Service call.)
$45 per hour (one hour minimum) $35 diagnostic fee (If not repairable.)
We do not accept Paypal or Credit Cards as payment. We do take cash, checks and money orders.
Mechanical to Electronic Pinball & Video Game Restoration
EM = ELECTROMECHANICAL (score reels,relays) SS = SOLID-STATE (digital displays, chips) 1978-later
Pinball Medic will work on the earliest coin operated electromechanical wood rails to the latest Solid State Pinball games.
Use this Game Repair Request Form if you need to have your pinball or video game repaired, refurbished or restored.
Use our Contact page for more ways to contact us.
Pinball Refurbishment / Restoration process. Video Game Refurbishment / Restoration process.
In the shop repair labor rate is $45 per hour for game repair, refurbishment or restoration for both types (Electro-Mechanical & Solid State) of pinball machines and video arcade games.
See our Service page for more information on labor rates and repair services.
A game specific payment is required to start a pinball machine refurbishment or restoration. This payment is dependent on the estimated cost of the replacement parts and the estimated total cost of the refurbishment.
Typically, the larger the shopped value of the pinball usually indicates more expensive parts and perhaps playfield detailing will be needed for a total game refurbishment or restoration.
The game's pre-restoration condition, cabinet carpentry work, extensive board repair, playfield complexity and condition, cost / availability of side art stencils and replacement parts will all affect
the final cost of a pinball restoration and may not be included in the initial game refurbishment cost quote if a restoration is later deemed necessary.
Game modifications (or MODs) include, but, are not limited to: Adding LED(s), ramp and hole protectors, custom playfield plastics and game rom, stabilizing backglass artwork. Anything that was not installed on the game at the factory is considered
a game modification. The exception to this are game specific modifications that were provided by the game's manufacturer to repair a design flaw on the pinball's playfield. These additional costs and part availability issues will be dealt with on a game by game basis.
New Monitors for Sale, Game Monitor Repair and Local Monitor Replacement
$45 per hour in-shop only (one hour minimum)
$35 diagnostic fee (If monitor is not repairable)
Commercial discounts are available for the repair of multiple monitors of the same model and type.
Monitor Services include: Capacitor Kit (cap kits) installation, High Voltage section refurbishment, power supply refurbishment, CRT (screen) demagnetizing, monitor adjustment and cleaning, monitor electronics
upgrades, general monitor troubleshooting and repair.
Monitors must be repaired as in shop repair only, but can be removed from the game for repair and replacement as Field Service.
Arcade Game, Video and Pinball Machine Parts & System Boards Catalog
See our main game parts page for more information.
TRANSISTORS
TIP 122, TIP 102, TIP120, TIP42C, 2N4401, 2N4403, 2N3904, 2N3906
INTERGRATED CIRCUITS (IC, CHIPS)
LM323K (V REG), 555 (TIMER), AMD-2901, 74LSxxx (LOGIC), PINBALL GAME ROM (PROGRAMMED PROM)
DIODES
1N914 (SWITCH MATRIX DIODE), 1N4006 (BYV 26D, COIL DIODE)
CAPACITORS
15,000 uF, 100 uF, .22 uF (MEMORY CAP)
LIGHT BULBS
47, 89, 555, 906
PINBALL GAME BALLS
GAME PARTS KITS
Pinball Circuit Kits, Monitor Cap Kits, Playfield Rubber Ring Kits, Mounting Screw Kits
All Electronic Parts Kits require soldering skills to install.
Screw kits help prevent poor circuit board grounding and help eliminate sound hissing noises (see Tech Tips page 2)
WPC POWER SUPPLY/SOLENOID BOARD GET-WELL KITS (15,000 uf caps x 5, BR2 replacement)
WPC89 and WPC-S system kits remedies most random or flipper activation game resets
LATE MODLE PINBALL RANDOM RESET REPAIR KITS (game manufacture specific capacitor and/or bridge rectifier kits)
GOTTLIEB LARGE CAP KIT (SYSTEM 1,80 Orange capacitor replacement. Kits require soldering skills to install)
BALLY -35 SCREW SET (CIRCUIT BOARD SCREWS)
WPC SCREW SET
(CIRCUIT BOARD SCREWS)
STERN (SS) CIRCUIT BOARD MOUNTING SCREW SET
MONITOR CAPACITOR / GET WELL KITS
NEW PINBALL BOARDS WPC89 MPU ( two board versions), WPC-89 & WPC-S
POWER SUPPLY / SOLENOID DRIVER
WILLIAMS SYSTEM 3-6 POWER SUPPLY, WILLIAMS SYSTEM 7 & 9 POWER SUPPLY
WILLIAMS SYSTEM 11 AND DATA EAST POWER SUPPLY
GOTTLIEB SYSTEM 1 POWER SUPPLY, GOTTLIEB SYSTEM 80 POWER SUPPLY
BALLY -35 -17 MPU BOARD (AS-2518-35 or AS-2518-17, AS-2518-133, AS-2962-7 MPU boards)
STERN MPU100 or MPU200 MPU new replacement boards
BALLY / WILLIAMS TYPE 2 FLIPPER BUTTON OPTO COUPLE BOARD
PARTS BY CATAGORY: Circuit Board Capacitors
Circuit / Coil Diodes
Coin-Op Field Service
Game Monitor Repair/ Replacement Integrated
Circuit Chips
Light Bulbs Monitor Cap
Kits New Pinball Circuit Boards
Pinball Circuit Board Repair
Pinball Game Balls
Pinball Game Parts
Pinball Refurbishment
Pinball Machine Repair
Pinball ROM Programming
Rubber Ring Kits
Specialty Mounting Screws
Pre-driver / Power Transistors
Video Arcade Game Repair
Video Game Restoration
Video Game Parts
Yellow Jacket Pinball Dolly |