We are restocking our bulk rubber ring inventory and do not have all of the sizes and types of rings for every kit listed. Kit availability is limited by game title until we are fully restocked.

Pinball Medic only sells complete playfield rubber ring kits. We believe that ALL rubber rings on a playfield should be replaced at the same time to avoid contaminating the new rubber with dirt and decay off of an old rubber ring and to insure rubber rings will be the same age.
See our Tech Tips page for more playfield care information.
We do sell specialty rubbers in smaller quantities. Ex. Playfield post caps.

Use this Ring Kit Order Form to order our Playfield Rubber Ring Kits.
Playfield Rubber Ring Kits prices start at $13.00 and up.

Most kits weigh a pound boxed and cost $3.80 to ship by USPS mail.

• All Rubber rings are made with Pure Gum Rubber and come from the SAME ring manufacturer for
SUPERIOR CONSISTANT QUALITY and EXTENDED LONGEVITY.
Kits are Available in Black and White ring colors for any pinball game Pinball Medic makes a kit for.

• Rubber Kit's contents are compiled from the game's manual and are complete.
Exception - kits do not contain Special Order rubber parts.
Note: Game Manuals can contain erroneous information regarding size and quantity of the playfield rubber rings. Most of our kits have been applied to the actual pinball game before a kit was compiled.
If there is an error in one of our playfield ring kits, all corrective rubber rings will be sent free of charge.

• Playfield Rubber Ring Kit prices start at $13.00 and up.

• Most unlisted Pinball Playfield Rubber Ring Kits can be ordered. Electromechanical pinball and Gottlieb game kits may need game owner to specify kit contents.  We must have rubber sizes and ring quantity information to build a non-listed Ring kit. We offer free shipping to the first person to order a kit that is not listed.

• Pinball Playfield Rubber Ring Size Chart can be used to measure old ring size.

• Rubber Rings are Sized By Inside Diameter (I. D.).     Small single post rubber rings smaller then 1/4 of an inch are sized by outer diameter O. D.
If you have the game's manual, use the charts at the bottom of this page to convert most pinball manufacture's ring part numbers to I. D. size.

• Printable Rubber Ring Sizing Chart (PDF)

• White or Black colored ring kits CAN be built for any pinball machine Pinball Medic stocks a kit for.
Note: The harder the rubber (black color rings are harder then white) the less bounce the rubber rings will have.
A black rubber kit is not recommended to be installed on a electro-mechanical pinball as posts and playfield plastics can be damaged due to the decrease in the shock absorption of black rubber rings. Also, black rubber rings don't   "look good" and don't belong on an EM Pinball.

All flipper and ball shooter tip rubber colors are matched to the playfield ring color as follows:
Black Playfield Rings = Black Rubber flipper and shooter tip rubber
White Rubber Rings = Red Flipper rubber and a White shooter tip.
See our TECH TIPS page for more info on playfield rubber rings and when to replace them.